Residential & Commercial Roofing in Buncombe
Our service list isn't complicated: we fix roofs, replace roofs, and install new ones. We also handle gutters, metal systems, and flat roofing for commercial buildings across Buncombe.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →Roof Repair
Missing shingles from wind damage expose the underlayment to UV degradation. If the underlayment is compromised, water intrusion follows the next rain. We don't just replace the missing shingle. We pull back surrounding courses, inspect the underlayment for UV damage and nail holes, replace compromised sections, and weave new CertainTeed Landmark or IKO Cambridge shingles into the existing field. Proper repair, not a patch.
Get a Free Quote →Storm Damage Repair
After every major storm in Buncombe, out-of-town companies flood the area offering free inspections. They're not all bad, but many are. We're local, we're licensed, and we'll be here to honor the warranty. Storm chasers won't be.
Get a Free Quote →New Roof Installation
For Buncombe new builds, we recommend Tamko Heritage or Malarkey Vista AR for budget-conscious projects and Atlas Pinnacle Pristine with Scotchgard for algae-resistant performance. High-end builds get GAF Timberline HDZ or Owens Corning Duration STORM. Each carries different warranty tiers. We walk you through the comparison so you're choosing with real information, not marketing brochures.
Get a Free Quote →Metal Roofing
Metal roofing reflects solar heat instead of absorbing it. In Illinois, that means 15-25% lower cooling costs compared to dark asphalt shingles. The higher upfront cost pays for itself over the life of the roof. And the life of a metal roof is twice or three times longer than shingles.
Get a Free Quote →Shingle Roofing
Shingle color matters more than you think. Dark shingles absorb heat. Great for cold Illinois winters, harder on cooling bills in summer. Lighter colors reflect heat. Algae-resistant granules prevent black streaking. We bring shingle samples to your Buncombe home so you can see them against your siding and trim.
Get a Free Quote →Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Buncombe. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →Commercial Roofing
Commercial roofing in Buncombe means flat and low-slope systems: TPO, EPDM, PVC, modified bitumen, and built-up roofing. We install and repair all of them. Retail, warehouse, office, restaurant, multi-family. Our commercial crew handles buildings from 2,000 to 100,000 square feet.
Get a Free Quote →Gutter Installation
Gutter replacement in Buncombe costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →Skylight Installation
Skylight replacement on existing curbs: VELUX FCM curb-mount units install directly on the existing curb frame. No structural modification, no interior disruption. The FCM sits on the curb with a built-in sill pan and integrates with a new QCM flashing kit. Low-E4 laminated glass with argon fill provides R-value improvements over older skylights. Solar-powered blinds and venting available on VSS models. The 10-year No Leak Installation Warranty requires VELUX-certified installation with the complete flashing system. We're certified in Buncombe.
Get a Free Quote →